In the Platform-Frame construction system each floor of a building functions as a platform to support the floors above. Although developed in Northern Europe, the Platform-Frame system is widely used in North America. Each wall or floor is composed of evenly spaced laminated wood or KVH structural timber studs.
What is the purpose of platform framing?
Platform framing often forms wall sections horizontally on the sub-floor prior to erection, easing positioning of studs and increasing accuracy while cutting the necessary manpower.
What is a platform wall?
In the Platform framing construction method, each wall is formed from individual wall units which can be constructed off-site, resulting in a reduction in on-site construction and associated costs, as well as achieving a higher quality of the finished product.
How is platform framing done?
Platform framing developed out of balloon framing. This framing system starts with a floor platform on top of which stud walls are built. A second platform is built on top of those load bearing walls and additional walls are built on top of the second platform. Those walls support the roof.
What are the disadvantages of platform framing?
One of platform framing's biggest downsides is waste; while the frame is being constructed, lumber is repeatedly shaped and resized on site, creating a tremendous amount of environmental waste, not to mention a financial loss to the client.
What are platforms in construction?
A system of framing a building in which floor joists of each story rest on the top plates of the story below or on the foundation sill for the first story, and the bearing walls and partitions rest on the subfloor of each story. (Usually one story constitutes a platform.)
AP State Housing Corporation is proposing to procure various construction materials worth around Rs 8200 cr through Reverse tendering process. Tenders will be floated on e-procurement flatform. Details of tenders are available at our APSHCL website. https://t.co/zdwit9ybMz— Andhra Pradesh State Housing Corporation (@APStateHousing) December 6, 2020
What are equipment platforms?
An equipment platform is an unoccupied, elevated platform used exclusively to store and provide access to mechanical systems or industrial equipment. The stairs, elevated walkways, alternating tread devices, and ladders used to access the space are also considered a part of the equipment platform.
Frequently Asked Questions
What are the three types of platform?
While platforms can be classified in many different ways, the size and capabilities of the platform is a common way. Using this, there are three types of platforms: Personal Computer, Minicomputer and Mainframe Computer.
What is an elevated platform called?
An aerial work platform (AWP), also known as an aerial device, elevating work platform (EWP), cherry picker, bucket truck or mobile elevating work platform (MEWP) is a mechanical device used to provide temporary access for people or equipment to inaccessible areas, usually at height.
What is construction lifting equipment?
Lifting equipment is used to lift and lower loads on site and can include cranes, forklifts, trucks, and lifts. That said, strategically implementing lifting equipment during construction projects can quite literally ease the load and improve safety, efficiency, and client satisfaction.
What are the two basic types of elevating platforms?
There are two basic types of mobile elevating work platforms (MEWPs): 1. Scissor 2. Boom.
What is a working platform in construction?
What is a working platform? The work at height regulations define a working platform as any platform used as a place of work or as a means of access to or egress from a place of work, including any scaffold, suspended scaffold, cradle, mobile platform, trestle, gangway, gantry and stairway that is so used.
What is a scaffold platform?
Scaffold is a temporary, metal tubular structure forming a walkway, travel way, or a work platform designed to facilitate works at heights greater than 6 feet and that meets the requirements set by this standard.
- What is the most common injury suffered by construction workers?
- Falls are the number one cause of construction accident injuries and deaths. Employers are required to set up the work place to prevent employees from falling off of overhead platforms, elevated workstations or into holes in the floor and walls.
- What are the injuries of women in construction?
There is little data about injuries to women in construction. One study of union carpenters found that women had higher rates of sprains/strains and nerve conditions of the wrist and forearm than men. This is likely due to the fact that women tend to be assigned more repetitive tasks that can cause these injuries.
- What is the biggest challenge of being a women in construction?
- Earning respect as a woman in a male-dominated workplace like construction is one of the biggest challenges faced by women. Many women say that they have to work harder to earn the respect that men get for doing the same thing, or that their opinions don't carry the same weight as their male coworkers.
- What is the number one cause of a injuries for construction workers?
Falls are by far the most common cause of injuries and fatalities in the construction industry. Lack of proper fall protection mechanism is the single biggest reason why fall accidents are so common on construction sites.
- What is the #1 reported workplace injury?
One of the most common workplace injuries is employees straining their back or neck. Strains typically occur when employees try to lift supplies or a delivery without the proper technique or equipment.
- How do stilt walkers stand up?
Hand-held pole stilts consist of two long poles, each with a foot support. The stilt walker holds onto the upper end of the pole, rests their feet on the foot plates, and pulls upward on the pole while taking a step.
What is a flatform in construction
|What are the two types of stilts?
|Types of stilts
|What is a stilt Walker?
A person who walks on stilts
stiltwalker (plural stiltwalkers) A person who walks on stilts.
|What are stilts used for?
A Bird's-Eye History Of Walking On Stilts In 1411, the count of Namur banned the use of stilts in the Belgian city. Over the past 600 years, the elevated footwear has been used for everything from putting up drywall to fishing and even jousting.
|What is a stand up rollator?
The UP Walker Stand Up Walking Aid is a rollator with forearm supports that is designed to provide postural support for users to walk upright. People with arthritis will find this walking aid provides more support and stability standard rollators and walkers.
|What is heavy lifting in construction?
Heavy lifting, which consists in moving a structure or a load vertically, sliding, which involves the horizontal shift of a structure or a load, rotation sometimes, when the operation also entails a change in orientation of the structure.
|What is it called when you carry something heavy?
“Heavy lifting.” Merriam-Webster.com Thesaurus, Merriam-Webster, https://www.merriam-webster.com/thesaurus/heavy%20lifting.
- What is the rule for lifting something too heavy?
Before lifting an object, determine the maximum weight that can be safely lifted. Generally, if a load is heavier than about 50 pounds, do not attempt to lift it manually. Use a lifting device – such as a powered barrel dumper – to lift loads deemed too heavy for workers.
- What is a lift in construction terms?
Construction lifts are powerful tools. Encompassing boom lifts, scissor lifts, forklifts and other types of aerial and man lifts, construction lifts refer to any lifting machinery that features an aerial platform supported by a vehicle-mounted extension.
- What are the 3 lifting categories?
A strength program needs to incorporate all three types of lifts to achieve balance and athleticism. The core lifts are the bench, the squat, and the dead lift.
- What is a construction platform?
What are construction Platforms? An important development in Modern Methods of Construction (MMC), the term 'Platforms,' commonly used in manufacturing, refers to sets of components or assemblies that can be put together in a multitude of different ways to create multiple different products.
- What is a scaffold in construction?
Scaffold, in building construction, temporary platform used to elevate and support workers and materials during the construction, repair, or cleaning of a structure or machine; it consists of one or more planks of convenient size and length, with various methods of support, depending on the form and use. scaffold.
- What is another name for platform framing?
Platform framing (also known as western framing) is the most common framing method for residential construction where each floor of a pole barn or conventional building is framed independently by nailing the horizontal framing member to the top of the wall studs.